AluVenture 11000 XE / CCFC is our first model out in our new 11000 series. Our mission was to develop a very sea worthy and comfortable vessel for commercial usage that was inside of with limits for transportation on a trailer. The result is this very exciting 11 meter long and 2.9 meter wide hull. Without step and rails the hull is very stable and comfortable to motor even in rough sea. As the first model out in this hull series, we decided to build a walk-around solution where the wheelhouse is placed on four rubber blocks to reduce vibration and noise, with a small cabin in the front with a bed for 2 persons, toilet, sink and induction plates, since this is meant as a work boat. We also added a flybridge which makes it easier to navigate the vessel in crowded areas such as harbors, fish farms, etc. With the extremely comfortable hull and a very quiet (<70dB) work environment in the special wheelhouse this boat is a perfect match for those that are out on the water many hours, regardless of the weather conditions.


Length (m)

< 55

Speed (knots)


Crew (sleeps 2)


Width (m)

Technical information

Lenght11.074 meter
Width2.908 meter
LWL9.756 meter
BWL2.473 meter
Draft0.66 meter (fully load; no engine)
Depth3,984 meter
Empty weight3,950 kg
Max weight6,500 kg
Fuel tank1,500 liter
Recommended engine400-900 hp
  • Rollup_7
  • Rollup_6
  • 12
  • 03
  • 02

AluVenture 11000 XE / CCFC is also available in a PREMIUM EDITION version. This version comes with a separate toilet (instead of having it in the cabin) with a sink and a shower head. The sleeping cabin is still 2.16 meter long, which should fit most. The kitchen has also been moved and is now located in the apt of the boat, in front of the engines. Out here it has two gas burners, a sink and a refrigerator. For protection, this version of the boat comes with a roll out rain and sun roof.

  • Heat 01
  • Heat 02
  • Heat 03
  • Heat 04
  • Heat 05
  • Heat 06
  • Heat 07
  • Heat 08

Standard edition

Walk-around helm and cabin with open aft deck area
Flybridge solution with seats for two
2 x pilot shock absorbing seats in helm
Back bench solution for three people in helm
Removable aft table with cup holders
Bench solution with room for three in aft
Fully suspended silent wheelhouse solution with large sliding doors on both sides
Self-draining deck
Large under deck storage in apt and bow
Targa for flybridge
Cabin with sleeping for 2, toilet and sink solution
Freshwater (56 l.) and wastewater (56 l.) tank
Fuel tank with max 1500 liters with diesel and 925 liters gasoline.
Deck hatch in aft
Artificial leather finish
3 electric bilge pumps
Laminated glass with window wipers
Shore power with converter and charger
LED spotlights on roof, 4 pointing towards bow, 1 to the aft
LED inertial lights
Flag pole
Skylight window for cabin
12V power outlets in wheelhouse and cabin
Main control switches for House and Engines
Navigation lights
Signal Horn
2 x 2 kg Fire extinguishers
Solar powered cabin ventilation fan
Deck covering Treadmaster Dimond Pattern

Premium edition

Separate cabin for toilet and shower
Hot water boiler 220V
Bow thruster
Jet thrusters
Pull out sun and rain protection
Flybridge coverage
Aft wet bar solution with sink & faucet, gas burner/induction  and fridge
Coverage for apt wet bar
FlexiTeak deck
Can be delivered as CE class B instead of standard CE class C
3M foliage on hull
ZipWake trim control
Lenco trimflaps
Electronics (plotters, radar, stereo, inducers, autocontrol, etc.)
++ contact us for more options

Our main priority is that you will be happy with the boat you are getting. That is why can do a lot of customization to your specific boat, so that it suites your needs and wants better than the “standard” version.


Contact us today so we can start designing your perfect boat!